Products
-
Low carbon Ferro Chrome Cr50-65% C0.1 Ferrochrome Manufacturer in China FeCr Ferrochrome
Ferrochrome is an iron alloy of chromium and iron. It is an important alloy additive in steelmaking. The lower the carbon content of ferrochrome, the more difficult treatment and smelting. Carbon content below 2% ferrochrome, suitable for smelting stainless steel, acid steel and other low carbon chromium steel. Iron chromium containing more than 4% carbon, commonly used for refining ball bearing steel and automotive parts steel, etc.
-
ferro silicon magnesium alloy Nodulizer fesimg alloy for casting Supply manufacturer
Rare earth magnesium ferrosilicon alloy is one of the main raw materials for the iron and steel industry.
1. Nodulizer, vermicular agent and inoculant for cast iron. Rare earth magnesium ferrosilicon alloy, also known as magnesium alloy spheroidizer, is a good inoculant with high mechanical strength and strong deoxidation and desulfurization effects. 2. Additives for steelmaking: light rare earth magnesium ferrosilicon alloy used in the production of nodulizers, vermicularizers, and inoculants, and also used as additives and alloying agents in the production of steel and iron. It is used for refining, deoxidation, denaturation, neutralization of harmful impurities with low melting point (Pb, arsenic, etc.), solid solution alloying, formation of new metal compounds, etc. to purify steel.
-
Manganese Metal Mn Lump Mn Shipping Timely Manganese For Steelmaking
Electrolytic metal manganese refers to the elemental metal by using an electrolytic cell to electrolyse manganese salt
precipitated by acid leaching of manganese ore. It is firm and brittle flakes with irregular shape. It is bright on one side with silver white color but rough on the other with brown color. The purity of electrolytic manganese is very high, containing 99.7% manganese.
-
Manganese flake Electrolytic pure Mn with purity lumps 95% 97% metal
Ferro manganese is one type of iron alloy mainly composed of manganese and iron.The chemical properties of manganese are more active than iron.When add the manganese to molten steel,it can react with ferrous oxide to form the oxide slag which is insoluble in molten steel,the slag float on the molten steel surface,reduce the oxygen content in the steel.At the same time,the binding force between manganese and sulfur is greater than the binding force between iron and sulfur,after add the manganese alloy,the sulfur in the molten steel is easy to form a high melting point manganese alloy,the sulfur in the molten steel is easy to form a high melting point manganese sulfide with manganese and transfer into the furnace slag,thereby reducing the sulfur content in the molten steel and improving the forgeability and rollability of steel.Manganese can also increase the strength,hardenability,hardness and wear resistance of the steel.So the ferro manganese often use as the deoxidizer,desulfurizer and alloy additive in steel making and that makes it the most used iron alloy.
-
Magnesium alloy ingot 99.9% magnesium metal price Factory Magnesium Alloy Ingot Gadolinium
Magnesium ingot is a new type of lightweight corrosion-resistant metal material developed in the 20th century. It is mainly used in four major fields: magnesium alloy production, aluminum alloy production, steelmaking desulfurization, and aviation and military industry.
-
FerroSilicon Ball For Steelmaking With Good Price Supply silicon carbide wear-resistant Silicon Briquette deoxidizer
Silicon carbide ball deoxidizer is a novel high-performance composite deoxidizer, which can replace the more expensive traditional deoxidizer ferrosilicon powder and alloy powder. It has the advantages of rapid deoxidation, early slag formation, thick reducing atmosphere and rich foam, etc. It can also effectively improve the recovery rate of elements, and also has a carburizing effect, which can replace part of the recarburizer and reduce the cost of steelmaking. Using silicon carbide as a deoxidizer for steelmaking can stabilize the quality of molten steel, refine grains, and remove harmful impurities in molten steel. During the use of traditional silicon carbide, the dust is large, the density is low, and it is not easy to sink. Our company processes the silicon carbide powder into a 30-50mm spherical shape, which has the advantages of high recovery rate, small dust, convenient use and low price.
-
Ferrosilicon powder 72% 75% ferro silicon inoculant Fesi6.5 fesi Alloy Soft magnetic material
Ferrosilicon powder is widely used in steel industry, casting industry and other industrial production. Ferrosilicon is an indispensable deoxidizer in steelmaking industry. In torch steel, ferrosilicon is used for precipitation deoxidation and diffusion deoxidation. Brick iron is also used as an alloying agent in steelmaking. Adding a certain amount of silicon to the steel can improve the strength, hardness and elasticity of the steel, improve the permeability of the steel, and reduce the hysteresis loss of transformer steel.
-
Ferro Silicon FeSi from China Supplier low aluminum ferrosilicon particles on Korea Ferrosilicon grains
Silicon particle is the abbreviation of ferrosilicon particle, that is, ferrosilicon inoculant, an inoculant used in steelmaking and ironmaking.
-
Direct Wholesale Casting Iron Steel Casting Use FeSi Ferro Silicon 75% 72%
Ferrosilicon is a ferroalloy composed of iron and silicon. Ferrosilicon is an iron-silicon alloy made by smelting coke, steel shavings, and quartz (or silica) in an electric furnace. Since silicon and oxygen are easily combined into silicon dioxide, ferrosilicon is often used as a deoxidizer in steelmaking. At the same time, because SiO2 generates a lot of heat, it is also beneficial to increase the temperature of molten steel during deoxidation. At the same time, ferrosilicon can also be used as an alloying element additive, and is widely used in low alloy structural steel, spring steel, bearing steel, heat-resistant steel and electrical silicon steel. Ferrosilicon is often used as a reducing agent in ferroalloy production and chemical industry.
